Water supply represented manufactured goods and description, at approximately calculate ago shipping. This manufactured goods is primarily of Ford develop car including the intention of the thermostat carries a get behind in feeler approximately models reside in a screw in feeler so you be inflicted including to be austere
- Foxy
Advertised as replacement for 2007 Explorer V6 replacement part. Looks the same but does not fit in housing. Flange is too big and it won't press in.
- R. Horne "Fishinman"
I bought this part as my check engine light came on. I purchased an OBD II scanner pro my car and cultured with the intention of the conundrum was with my thermostat coolant temperature. Currently there was a possibility with the intention of it was the thermostat feeler going bad save pro with the intention of seemed unlikely since my car showed the coolant level as everlastingly in succession exceptionally frost - a guaranteed road sign with the intention of the thermostat is wedged commence and putting too much coolant into your engine. While replacing the thermostat, I resolute to take advantage of the chance to replace Fords' magical becoming vanished thermostat housings (they are known pro "melting away" with cracks, leaks, and with the intention of.) I was joyful I bought the high and lower housings to replace since as I pulled my ancient housing out, there was lots of calcification and leaked coolant around the underside part of the lower housing. Even though my coolant levels were fine, something was visibly NOT fine with the housing. Replacing the feeler gave me the added concord of mind with the intention of I had a extra, true feeler in place with the intention of would likely perform better than the void lone did. It wasn't a extremely expensive part so I resolute to go pro it. My car was idling pun and my mileage was getting poor - also symptoms of the thermostat and not just the feeler.Take my information: if you are replacing any part of the thermostat apparatus, replace as much as you can. It will be cheap insurance down the path and trust me, you don't want to do this renovate numerous era pro a different part each time. I replaced the high and lower housing, the thermostat, the thermostat O-seem (which was not built-in with the thermostat), the thermostat housing gasket, and the thermostat feeler. Since I was there I also replaced the high and lower radiator hoses and replaced those grave ancient spring hose clamps with screw hose clamps to get on to any prospect repairs easier. You will be inflicted with to put extra coolant in the car as you are made so approve of some of with the intention of as water supply. If you approve of the sort you need to mixture with water, mixture it with distilled water to prevent calcification/mineral build-up. I old this part to renovate a 2005 Ford Explorer XLS with a V6 4.0 Liter SOHC engine.
- MEcougar
OEM 9377 Coolant Temperature Sensor
Coolant temperature sensor
No comments:
Post a Comment